Star Wars: Episode 1 Racer Cheats for Nintendo 64

Note: Saved game slot four must be unused before starting this code. Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRTANGENT as a name by pressing L to select each letter. Select "End", then press L followed by B. Select the same player file, then hold Z and enter ABACUS as a name by pressing L to select each letter. Select "End", then press L followed by A. Press C-Right at the main menu. The message "All Pod Racers, All Tracks Available" will confirm correct code entry. A file named "BDG" will be created in saved game slot four with all races completed and all racers, including Jinn Reeso and Cy Yunga, unlocked. Begin a race on any tournament track. Pause game play and press Up, Left, Down, Right. All options on the cheat menu that appears will be unlocked. Additionally, an auto-pilot feature can be toggled by pressing R + Z during game play, allowing only the speed to be under manual control.

The master code may also be entered by holding Z at an empty game file. While holding Z, press L to select the letters RRTANGENTABACUS. While continuing to hold Z, press L to select "End". The word "OK" should appear to confirm correct code entry. Pause game play and press Up, Down, Left, Right to unlock all cheats.

To complete the game easily, hold Z at an empty game file. While holding Z, press L to select the letters RRTANGENTABACUS. While continuing to hold Z, press L to select "End". The word "OK" should appear to confirm correct code entry. Then, press L followed by A. Begin a race, then press Start to pause. Press Left, Down, Right, Up, highlight "Game Cheats", set the debug level 6, continue the race and hold Up for the entire race to easily win any race.

Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRJABBA as a name by pressing L to select each letter. Select "End" (while Z is still held), then press L followed by A (after releasing Z). Begin a race on any tournament track. Pause game play and press Left, Down, Right, Up. The invincibility option may now be enabled on the cheat menu that appears. Note: Your pod can still be destroyed by falling off cliffs or by a turbo boost fire.

Enable the "All cheats" code. In some cases gravity can be disabled by pressing R + Z, allowing the pod to float on its own.

Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRTHEBEAST as a name by pressing L to select each letter. Select "End", then press L followed by A to enter any desired name. Begin a race on any tournament track. Pause game play and press Left, Down, Right, Up. The mirrored tracks option may now be enabled on the cheat menu that appears.

Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRDUAL as a name by pressing L to select each letter. Select "End", then press L followed by A to enter any desired name. You can control each engine of the podracer with controllers one and three. Press Analog-stick Up and Analog-stick Down on both controllers to accelerate and steer and Z for the turbo boost.

Note: Mars Guo must be unlocked by successfully completing certain tracks before using this code. Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRJINNRE as a name by pressing L to select each letter. Select "End", then press L followed by A to enter any desired name. Save the file as A. Select any other file with Mars Guo and he will be replaced with the bonus pilot.

Note: Bullseye Navior must be unlocked by successfully completing certain tracks before using this code. Select tournament mode, then highlight an unused position on the name entry screen. Hold Z and enter RRCYYUN as a name by pressing L to select each letter. Select "End", then press L followed by A to enter any desired name. Save the file as A. Select any other file with Bullseye Navior and he will be replaced with the bonus pilot.

Having a new data, after finishing the last track, go to the main screen and wait until an intermission sequence of a race starts then press C-Left. A photo of the producers will be shown. Press Z + C-Left and the message "All pods and track available" will appear. A new memory save will appear with this unlocked.

Enable the "Debug mode" code before the race begins. Press Down for about one second, then press Up. This will result in an entire completed lap. This can be repeated to finish the race in as fast as four seconds.

Enable the "All cheats" and "Debug menu" codes. At the beginning of any race, quickly get in first place then press Down until you pass the finish line. Then, press Up. If done correctly, you will get the "Lap two" message. Repeat until the race is finished. You may also get the ''Its a new lap record!'' message.

The basic layout of Malstare (in the Malstare 100 Amateur Circuit race) resembles Sears Point Raceway in Sonoma, California. The layout is the only resemblance to Sears Point.

Start the race "Beedo's Wild Ride", and go through level as normal. When you reach the first frozen lake, go to the right of the first arch. Go up the right side of the arch by using a quick boost. You will go very high in the air, then crash into the second frozen lake. Press C-Right just when you jump to spin on your way down. Note: This will not work if the "Invincibility" code is enabled.

At the beginning of a race, just before the "1" disappears, press Accelerate to get a large boost, if timed correctly.

If you are looking for Star Wars: Episode 1 Racer items for Nintendo 64 or games for other consoles and handheld systems, you will find the largest selection on the planet at eBay.

Star Wars: Episode 1 Racer Items